On-screen display
Information of the operation status, function, image adjustment condition, and menu is displayed in the screen.
Operation status display
a: Input display
Displays the selected input line ([SDI] or [CAM]). (page 20)
Sets the display condition with [MAIN MENU] → [SYSTEM CONFIG] → [STATUS DISPLAY].
b: Film mode display
This is displayed when [MAIN MENU] → [VIDEO CONFIG] → [GAMMA SELECT] → [FILM] is selected.
c: Signal format display
Displays the input signal.
[UNSUPPORT SIGNAL]: A signal that is not supported is input.
[NO SIGNAL]: Signal is not input.
@
NOTE
t Condition of status display can be set in [MAIN MENU] → [SYSTEM CONFIG] → [STATUS DISPLAY].
The status display disappears after three seconds in the factory setting.
t The displays for [UNSUPPORT SIGNAL] and [NO SIGNAL] may not display correctly.
Image adjustment knob condition display
[ BRIGHT ]
1
Turn the <BRIGHT>/<CONTRAST>/<PEAKING> knob.
The name and its adjustment value for the operating knob are displayed.
f This display disappears after two seconds of inaction.
f The adjustment value displayed in green is factory setting.
a
CAM
1080/59.94i
b
FILM
30
c
<BRIGHT> knob
<CONTRAST> knob
<PEAKING> knob
On-screen display
25