Step 3: Installing The Media Holder - Roland VersaUV LEJ-640 Setup Manual

3. Assembling and Installing

Step 3: Installing the Media Holder

Procedure

Place the shafts on the stand.

Pass the media holder (left) through the front shaft.
Pass it through from the right edge (as seen from the back of the machine).
Hook the media holder (left) on the shaft in the back.
w
Move the left media holder to the left side of the shafts.
Attach the media holder retaining screw.
Only light tightening is necessary for the media holder retaining screw.
Tighten loosely
28
Media holder
retaining screw
Shafts