Step 2 : Installing The Media Holder - Roland SOLJET Pro 4 XF-640 Setup Manual

Step 2 : Installing the Media Holder

Procedure

Place the shafts on the stand.

Pass the left media holder onto the shaft.
Pass it through from the right edge (as seen from the back of the machine).
Pass the media holder (left)
through the front shaft.

Move the left media holder to the left side of the shafts and attach the retaining screw.
Only light tightening is necessary for the retaining screw.
Retaining screw
Tighten loosely.
Shafts
Hook the media holder (left) on
the shaft in the back.
3. Assembling and Installing
25