Pentair FLECK 5800 XTR Installer Manual page 67

Screen name Parameters
Meter Meter type
Generic
Continuous
flow detect
Setting
review
Water Saver Water saver
Regen regen.
Remote Remote
regeneration signal
duration
Ref. MKT-IM-006 / E - 12.11.2019
Installer manual Fleck 5800 XTR - Programming
Values
0.75" paddle
0.75" turbine
1.00" paddle
1.25" turbine
1.50" paddle
1.50" turbine
2.00" paddle
3.00" paddle
Generic
0,1 - 999.9 pulses per
gallon
1 – 1500 pulses per
litre
ON
OFF
Displays a summary of all programmed settings.
OFF
1 – 255 seconds
OFF
Notes
Only available when meter regeneration type
is selected.
Select the type of meter installed with the
system. A generic option is available if the
installed meter does not match any other
selection. Selecting the generic meter type
requires setting the number of pulses per
gallon or litre to ensure proper metering.
Only available when generic meter type is
selected.
If set ON, gives an alarm if continuous flow is
detected at the outlet.
Set the timing for contact closure in seconds
in order to trigger the regeneration.
-
67 / 126