Base Unit - Avaya VSP 7000 Series Installing

Fabric Interconnect connectivity
Order code
AL7018001–E6
AL7018002–E6
AL7018003–E6
AL7018004–E6
AL7018005–E6
AL7018006–E5
AL7018007–E5
AL7018008–E5
Note:
Fabric Interconnect cables are ordered individually. Ensure that you order a minimum of two
matched FI cables for each unit. For a redundant Stack, you also require one pair of longer FI
cables to complete the loop from the bottom unit to the top unit.
Caution:
In operating environments where the ambient temperature is above 104 degrees Fahrenheit (40
degrees Celsius), the metal surfaces on the AL7018005–E6 FI cables can become hot. Use
caution when removing or handling hot equipment.

Base unit

The base unit switch is located on the front panel of the switch. Use the base unit switch to
designate a unit in the Stack as the Base unit. Slide the base unit switch to the down position to
designate a unit as the Base unit. You must designate only one switch in a Stack as the Base unit.
The base unit switch of all the other non-base units (NBU) in the Stack must be in the up position.
You can verify the Base unit from the base unit switch position and Base LED display on the front
status panel.
Installing Avaya VSP 7000 Series
40
Description
VSP 7000 Fabric Interconnect – 2 feet (0.6 meters)
VSP 7000 Fabric Interconnect – 5 feet (1.5 meters)
VSP 7000 Fabric Interconnect – 10 feet (3 meters)
VSP 7000 Fabric Interconnect – 16 feet (5 meters)
VSP 7000 Active Fabric Interconnect – 33 feet (10 meters)
VSP 7000 Fabric Interconnect Transceiver (two required for each Fiber
Fabric Interconnect cable)
VSP 7000 Fiber Fabric Interconnect cable – 164 feet (50 meters)
VSP 7000 Fiber Fabric Interconnect cable – 328 feet (100 meters)
Comments? infodev@avaya.com
August 2014