Adjusting The Display Viewing Angle - Blaupunkt New Orleans MP58 Operating And Installation Instructions

Adjusting the display settings
When you have fi nished making your chang-
es,
u press the MENU•OK button 5.
u Press the ESCAPE button ; to exit
the menu.
Selecting a display illumination during a
colour scan
u Press the MENU•OK button 5.
u
Press the or
until "DISPLAY MENU" appears on the
display.
u button 4 to open the
Press the
menu.
u
Press the or
until "COLOUR SCAN" appears.
u button 4 to start the col-
Press the
our seek.
The device starts changing the display illu-
mination colour.
To select the currently set colour,
u press the MENU•OK button 5.
button 4, you can start the
With the
colour seek again and select a different col-
our.
If you found and selected the desired col-
our,
u press the ESCAPE button ;.
34
button 4 repeatedly
button 4 repeatedly
Switching the constant colour change
for the display illumination on/off
(SCAN)
You can select a constant colour change as
the colour of the display illumination. If the
colour change is activated, the display col-
our changes constantly. The colour change
is switched on or off in the menu.
u Press the MENU•OK button 5.
u
Press the or
until "DISPLAY MENU" appears on the
display.
u button 4 to open the
Press the
menu.
u
Press the or
until "CONTSCAN ON" or "CONTSCAN
OFF" appears on the display.
u
Press the or
between ON (colour change on) and
OFF (colour change off).
When you have fi nished making your chang-
es,
press the ESCAPE button ;.
u
Adjusting the display viewing
angle
The angle at which you, the driver, looks at
the display is dependent upon, among oth-
er things, the installation position of the de-
vice and your seating position and physical
size. You can increase or decrease the dis-
play contrast to perfectly read the display
from your viewing angle.
u Press the MENU•OK button 5.
u
Press the or
until "DISPLAY MENU" appears on the
display.
button 4 repeatedly
button 4 repeatedly
button 4 to toggle
button 4 repeatedly