Mounting Locations - Toro 136-1664 Installation Instructions Manual

1. Use this hole if you are mounting the kit in front of the left,
rear tire.
2. Use this hole if you are mounting the kit in any location behind
the rear tires.
Mounting the Kit to the Machine

Mounting Locations

You can mount this kit in 6 locations on the machine
the kit in the desired location.
Note:
For 1500 Series machines, you can only mount the kit in the 2 locations in front of the rear tires.
1. In front of the rear tire
Figure 3
3. Use this hole if you are mounting the kit in front of the right,
(Figure
Figure 4
2. Side of the engine guard
4
rear tire.
4). Refer to 1 of the following procedures to mount
3. Rear engine guard
g037081
g037123