Chapter 3: Service program PowerSys
Basic Settings
Starting MemTool
For launching MemTool as a stand-alone tool, execute Memtool.exe via the Windows Main menu
Start - Programs -UDE MemTool.
Figure 26:
MemTool Settings
Figure 27:
Page - 22
Starting the MemTool program
Target selection
Edition p3_3_2x 08/09
SWT 3000 Equipment Manual
When starting MemTool for
the first time, the Select
Target Configuration dia-
log is displayed. Otherwise,
this dialog can be reached
via the menu
Target – Change.
The installation of MemTool
provides target files for se-
lection of Siemens CSP
(PowerLink) and PU3 (SWT
3000) systems.
Select Siemens PowerLink -
CSP and click OK.
© SIEMENS AG 2008