Configuration Of The Alarm Output Rxalr In The Powerlink; Alarm Messages In The Service Program Powersys - Siemens SWT-3000 Equipment Manual

SWT 3000 Equipment Manual

Configuration of the alarm output RXALR in the PowerLink

If integrated in the PowerLink system the RXALR output can be allocated to an alarm relay in the
ALRS configuration form.
Figure 57:

Alarm messages in the service program PowerSys

Figure 58:
In case of fault, which makes it impossible to run the normal operation the system produces fault
indications. This are displayed in the form <PowerLink /Information / System> "Alarms / Errors".
The display is refreshed with the button <Read>.
© SIEMENS AG 2008
Allocation of the EALR output from the iSWT to an alarm contact
The Alarm messages menu
Edition p3_3_2x 08/09
Installation and Commissioning
Page - 65