Windsor RRB 360 T Manual page 14

 Check tension, wear and damages on
the V-belt of the sweep roller drive.
 Check tension, wear and damages on
the V-belt of the sweep roller drive.
 Tighten the V-belt at the screw if neces-
sary.
Replacing the fuse
F 1
1 Automotive flat plug fuse
2 Pole fuse
Replace the automotive flat plug fuse
–
with the following rating: 3 A (F2) - vac-
uum pump.
 Replace defective fuse.
Pole fuse
 Replace defective fuse.
Note
A defective pole fuse may only be replaced
by a Windsor service technician or an au-
thorised expert. If this fuse is defective,
check the usage conditions and the entire
control system.
14
F 2
13
-
US