Table of Contents
Advertisement
(10) Power switch: PWR BTN
This 2-pin connector connects to the case-mounted power switch to power ON/OFF the
system.
(11) FAN Speed Headers (3-pin) : CPUFAN, SFAN1/SFAN2
These connectors support cooling fans of 350mA (4.2 Watts) or less, depending on the
fan manufacturer, the wire and plug may be different. The red wire should be positive,
while the black should be ground. Connect the fan's plug to the board taking into
consideration the polarity of connector.
(12) CD Audio-In Headers (4-pin) : CDIN
CDIN is the connectors for CD-Audio Input signal. Please connect it to CD-ROM CD-
Audio output connector.
PWRLED
Pin 1
JW FP
Pin 1
System Case Connections
1
3
CPUFAN
1
SFAN1
3
3
1
SFAN2
C DIN
1
4
CD Audio-In Headers
17
SPEAK
SPKR
NC
GND
VCC5
Advertisement
Table of Contents
