Jam Code List - Ricoh FW 810 Service Manual

Table of Contents

Advertisement

6 January 1990

6. JAM CODE LIST

Access Procedure:
1. When a document jam or paper jam occurs, press and hold the Clear/Stop
key.
2. Read the jam code (DJ 001, PJ 021, etc.).
NOTE: DJ = Document (original) Jam, PJ = Paper Jam
6.1 DOCUMENT (ORIGINAL) JAMS
CODE
001
002
016
017
018
019
020
022
024
026
027
032
033
034
035
036
CAUSE OF JAM
Initial jam.
An original is in the machine when the Call Service indi-
cator turns on.
2nd original transport detector leading edge ON check.
2nd original transport detector leading edge OFF check.
Original registration sensor leading edge ON check.
Original registration sensor leading edge OFF check.
Original is not fed within 6 seconds after the lead edge
is detected.
Original is too small. (Minimum: B5 lengthwise)
Original is under the original set detector when the origi-
nal stopper solenoid turns on.
Original is pulled out after the original registration sen-
sor turns on but before the original registration rollers
start turning.
The 1st original transport detector does not turn off.
2nd original transport detector trailing edge OFF check.
1st original transport detector OFF check (repeat copy).
1st original transport detector leading edge ON check
(repeat copy).
Original registration sensor trailing edge OFF check.
Original exit detector leading edge ON check.
4-30

Advertisement

Table of Contents
loading

Table of Contents