Konica Minolta bizhub C652 Owner's Manual And Installation Manual page 5

<If A3 or Ledger paper is set in step 1>
6. Touch "Print", select "A3 /11 × 17 ", and
press the start key.
A test pattern will then be produced on the A3
or Ledger paper.
7. Place the test pattern face down on the original
glass.
Magenta
A0P0IXC058DB
8. Place about ten sheets of A3 or Ledger
paper on the test pattern placed on the original
glass.
Lower the cover.
A0P0IXC059DA
9. Press the start key.
The machine will start reading the test pattern.
10. When the machine completes reading the test
pattern, the "Gradation Adjust" screen will reap-
pear.
11. Repeat steps from 6 through 9 to let the
machine read the test pattern two times.
×
12. Touch "Copy", select "A3 /11 17 ", and
press the start key.
A test pattern will then be produced on the
A3 or Ledger paper.
13. Place the test pattern face down on the original
glass.
Cyan
A0P0IXC061DB
14. Place about ten sheets of A3 or Ledger
paper on the test pattern placed on the original
glass.
Lower the cover.
A0P0IXC059DA
15. Press the start key.
The machine will start reading the test pattern.
16. When the machine completes reading the test
pattern, the "Gradation Adjust" screen will reap-
pear.
17. Repeat steps from 12 through 15 to let the
machine read the test pattern two times.
18. Touch "END."
<If A4 or Letter paper is set in step 1>
½×11
6. Touch "Print", select "A4 /8
press the start key.
A test pattern will then be produced on the two
A4 or Letter papers.
7. Place the test pattern face down on the original
glass.
8. Place about ten sheets of A3 or Ledger
paper on the test pattern placed on the original
glass.
Lower the cover.
9. Press the start key.
The machine will start reading the test pattern.
10. When the machine completes reading the test
pattern, the "Gradation Adjust" screen will reap-
pear.
11. Repeat steps from 6 through 9 to let the
machine read the test pattern two times.
E-5
12. Touch "Copy", select "A4 /8
press the start key.
", and
A test pattern will then be produced on the two
A4 or Letter papers.
13. Place the test pattern face down on the original
glass.
Magenta
A0P0IXC060DB
14. Place about ten sheets of A3
paper on the test pattern placed on the original
glass.
Lower the cover.
A0P0IXC059DA
15. Press the start key.
The machine will start reading the test pattern.
16. When the machine completes reading the test
pattern, the "Gradation Adjust" screen will reap-
pear.
17. Repeat steps from 12 through 15 to let the
machine read the test pattern two times.
18. Touch "END."
½×11
", and
Cyan
A0P0IXC062DB
or Ledger
A0P0IXC059DA