Extron electronics DMS 1600 Setup Manual page 30

3. Click OK .
If you selected a serial port or the USB port in step 2, the Matrix
Switchers Control Program is ready for operation.
4. If you selected IP [LAN] in step 2, the IP Connection window
opens.
a.
b.
c.
22 DMS 1600, DMS 2000, DMS 3200, DMS 3600 • Remote Control
Figure 10. IP Connection Window
Examine the Matrix IP Address field, which displays the last
Matrix IP address entered.
If necessary, enter the correct IP address in the field.
NOTE: 192.168.254.254 is the factory-specified default
value for this field.
If the switcher is password-protected, enter the appropriate
administrator or user password in the Password field.
NOTE: The factory configured passwords for all accounts
on this device have been set to the device serial number.
In the event of a complete system reset, the passwords
convert to the default, which is no password.
Click Connect . The Matrix Switchers Control Program is ready for
operation.