Extron electronics DMS 1600 Setup Manual page 24

Command
Channel mute commands
Channel mute
Channel unmute
Read channel mute
Global channel mute
Global channel unmute
View output mutes
Save and recall presets
NOTE: If you try to recall a preset that is not saved, the matrix switcher responds with error code E11.
Save current configuration as a
global preset
Example:
Recall a global preset
Example:
X@
KEY: = Output number
X$
= Mute status
X%
= Global preset number
ASCII Command Response
(Host to Unit) (Unit to Host)
X@ X@
*1B Vmt *1
X@ X@
*0B Vmt *0
X@ X$]
B
1*B
]
Vmt1
0*B
]
Vmt0
E } X$ 1 X$ 2
VM
X% X%]
, Spr
9, ]
Spr09
X% X%]
. Rpr
5. ]
Rpr05
01 – maximum number of outputs for your configuration
0 = not muted, 1 = muted
01 – 32
Additional Description
]
Mute output
]
Unmute output
1 = mute on, 0 = mute off.
Mute all outputs.
Unmute all outputs.
n X$
X$ ]
Each response is the mute status of an output,
...
starting from output 1.
n = the maximum number of outputs for your
configuration.
Command character is a comma.
Save current ties as preset 9.
Command character is a period.
Recall preset 5, which becomes the current
configuration.
X@
(no signal is output).
X@
(signal is output).