JRC JMA-610 Series Instruction Manual page 78

Plotting a line
Procedures 1
2 Select type of line with 1. Type and press [ENTER] key.
3 Select color of line with
4 Put the cursor on a location of the display at which you want to start
5 Move the cursor to a location of the display at which you want to finish
6 When you want to finish plotting the line, press [ENTER] key two times
7 Press [ MENU] key.
Press [MENU] key .
Select 8.Next and press [ENTER] key.
Select 4.NAV Information
Select 1.Edit User Map
Select 1.Make with cursor
plotting a line, and press [ENTER] key.
The start point of the specified line will be displayed.
plotting the line, and press [ENTER] key.
A line is plotted between the previous point and the end point.
Repeat this procedure so that sequential lines can be plotted.
at the same point.
Menu will be closed.
and press [ENTER] key.
and press [ENTER] key.
and press [ENTER] key.
2.Color and press [ENTER] key.
3-30