User Setting; User Setting (Load User Setting); User Setting (Save User Setting) - JRC JMA-610 Series Instruction Manual

3.8

USER SETTING

The operation status of the radar is recorded. If the system is operated by more than one operator, the
operators can register operation status as suitable for them and call the status. Operation status for up
to five operations can be registered, and a name be assigned to each status. (Up to 10 alphanumeric
characters)
The status is saved in an internal memory, therefore a flash memory card is not necessary for this
function.
<Data saved by the "User Setting">
Display Color and Brilliance Setting menu
Buzzer Volume
EBL / VRM Control CURS

3.8.1 USER SETTING (Load User Setting)

The operating state saved in the system can be loaded by performing the operation below.
When the operating state is loaded, the previous operating state is discarded. Therefore, if you
do not want to discard the operating state data, save the operating state by performing the
operation described in Section 3.8.2.
Procedures 1
2 Select
3 Select "user setting file" and press [ENTER] key.
4 Select

3.8.2 USER SETTING (Save User Setting)

The system's current operating state can be saved in the system by performing the operation
below.
Procedures 1
2 Select
3 Select
Press [MENU] key.
Select 8.Next and press [ENTER] key.
Select 2.User Setting
1.Load User Setting
Confirmation Window will appear.
1.Yes and press [ENTER] key.
The operating state data will be loaded.
Press [MENU] key.
Select 8.Next and press [ENTER] key.
Select 2.User Setting
2.Save User Setting and press [ENTER] key.
Select file number and press [ENTER] key.
Input the "file name", select
Confirmation Window will appear.
1.Yes and press [ENTER] key.
The operating state data will be saved.
and press [ENTER] key.
and press [ENTER] key.
and press [ENTER] key.
Enter and press [ENTER] key.
3-50