Set User Map Display (Mark Display Setting) - JRC JMA-610 Series Instruction Manual

3.6.4

Set User Map Display (Mark Display Setting)

The user map can be individually displayed (on) or hidden (off).
Setting by type
Setting by color : Setting can be made by color of mark or line.
The mark font display size can be selected.
Normal
Small
Setting display by type
Procedures 1 Press [MENU] key.
Select
Select
Select
2 Select 1.Display Mark Type and press [ENTER] key.
3 Set about each mark font / line pattern and press [ENTER].
About setting of All ,
4 Press [ MENU] key.
Menu will be closed.
: Setting can be made by mark font and line pattern.
: The mark is displayed in normal size.
: The mark is displayed in a size smaller than usual.
8.Next and press [ENTER] key.
4.NAV Information
4.Mark Display Setting
On : Displayed.
Off : Not Displayed.
Off : All types are not displayed even if all other settings are "On".
On : All types are displayed even if all other settings are "Off".
Individual : Setting by type is activated.
3-33
3.6 DISPLAY USER MAP
and press [ENTER] key.
and press [ENTER] key.
3