JRC JMA-610 Series Instruction Manual page 82

Setting display by color
Procedures 1
2 Select
3 Set about each colors and press [ENTER] key.
4 Press [ MENU] key.
Setting the mark font size
Procedures 1
2
3 Press [ MENU] key.
Press [MENU] key.
Select 8.Next and press [ENTER] key.
Select 4.NAV Information
Select 4.Mark Display Setting
2.Display Mark Color
On : Displayed.
Off : Not Displayed.
About setting of All ,
Off : All color's marks and lines are not displayed even if all other settings are "On".
On: All color's marks and lines are displayed even if all other settings are "Off".
Individual : Setting by type is activated.
Menu will be closed.
Press [MENU] key.
Select 8.Next and press [ENTER] key.
Select 4.NAV Information
Select 4.Mark Display Setting
Select 3.Mark Size
Normal : The mark is displayed in normal size.
Small : The mark is displayed in a size smaller than usual.
Menu will be closed.
and press [ENTER] key.
and press [ENTER] key.
and press [ENTER] key.
and press [ENTER] key.
and press [ENTER] key.
and press [MENU] key.
3-34