Change The Unit Of Rate Of Turn; Expansion - JRC JMA-610 Series Instruction Manual

3.5.10 CHANGE THE UNIT OF RATE OF TURN

The unit of "Rate of Turn" indicator can be changed.
This indicator is displayed at the upper center of the screen (Turn Rate).
Procedures 1 Press [ MENU] key.
MAIN MENU will appear.
2 Put the cursor on
SETTING menu will appear.
3 Put the cursor on
The unit of RATE OF TURN will appear.
4 Select the unit and then press [ENTER] key.
The unit of RATE OF TURN will be changed.
5 Press [ MENU] key.
Menu will be closed.

3.5.11 EXPANSION

The dimension of video display is enlarged to enhance a target. This setting is also switched by [EXP] key.
Procedures 1 Press [ MENU] key.
MAIN MENU will appear.
2 Put the cursor on
SETTING menu will appear.
3 Put the cursor on
EXPANSION SETTING MENU will appear.
4 Select mode and press [ENTER] key.
The mode of expansion will be changed and current mode is displayed at the upper right
(under "Day/ Night" mode) of the screen.
3.5 GENERAL OPERATIONS
3.Setting and press [ENTER] key.
2.Rate of Turn and then press [ENTER] key.
3.Setting and press [ENTER] key.
3.Expansion and press [ENTER] key.
3-27
3