Precise Speed Control Calibration (Optional) - Mercury SC 1000 Operation And Maintenance Manual

TURNING THE SYSTEM ON/OFF
1000
RPM SET
SMART
+ / - TO DISENGAGE
TOW ON
d
1000
RPM SET
SMART
+ / - TO DISENGAGE
TOW OFF
a - Increase set cruise RPM
b - Decrease set cruise RPM
c - Set cruise RPM
d - Cruise control off
SETTING CRUISE CONTROL
To set the cruise control RPM:
1. Press either the "+" or "–" button to bring up the cruise control display
screen.
2. Set desired cruise RPM. When the throttle is in the wide‑open throttle
position, the set RPM will be the maximum speed.
3. press "+" and "–" button simultaneously to engage the cruise control.
NOTE: The cruise control must be engaged for both gauges to display the
active cruise control setting.
CANCELING CRUISE CONTROL
To cancel the cruise control: press the "+" and "–" buttons simultaneously.

Precise Speed Control Calibration (Optional)

The Smart Tow with a GPS source is capable of maintaining the speed within
0.8 km/h (0.5 MPH) of the cruise control setting. It is not mandatory to complete
this tutoring exercise for the speed control to function, it will calibrate itself
during normal operation.
SMART TOW
c
CRUISE
LAUNCH
b
CRUISE
LAUNCH
40
30
20
10
0
SPEED
38
50
60
70
80
a
53434
eng