Speedometer Settings - Calibration - Mercury SC 1000 Operation And Maintenance Manual

SCREENS
FUEL USED SCREEN ?
( NO )
(SAVE)
TRIP SCREEN
YES
( NO )
(SAVE)
FUEL MGMNT SCREEN
YES
( NO )
(SAVE)
FUEL SCREEN ?
( NO ) (SAVE)
TABS SCREEN ?
YES
( NO ) (SAVE)
ACTIVE TRIM SCREEN ?
ON
( OFF ) (NEXT)
SCREENS
EXIT ?
[ NO ] [ YES ]
Speedometer Settings ‑ CALIBRATION
1. Press the "MODE/SELECT" and "+" buttons simultaneously for
approximately six seconds or until the "CALIBRATION" screen appears.
2. Press the "+" or "–" to change the settings.
eng
SC 1000 SPEEDOMETER
The fuel used screen is displayed "YES" for on
or "NO" for off.
( YES )
23544
The trip screen is displayed "YES" for on or
"NO" for off.
( YES )
23545
The fuel management screen is displayed
"YES" for on or "NO" for off.
( YES )
23546
The fuel screen is displayed "YES" for on or
"NO" for off.
( YES )
67237
The tabs screen is displayed "YES" for on or
"NO" for off.
( YES )
46442
Active Trim is "ON" or "OFF."
( ON )
67238
Select "NO" to go through the screen selection
again, "YES" to exit the screens, or "CAL" to
[CAL ]
go to the calibration screens.
52646
31