Maintenance Screen - Mercury SC 1000 Operation And Maintenance Manual

13. Quick Reference Screen: Indicates that the battery, engine temperature,
and pressures are operating properly.
14. Battery Voltage: Displays in large numbers the current voltage of the
battery.
15
TRIM
16
17
18
15. Power Trim Angle/Water Pressure: Displays the trim angle of the
engine and cooling system water pressure.
16. Fuel Percentage: Displays the percentage of fuel that is in the fuel tank.
17. Fuel Pressure: Displays the engine fuel pressure.
18. Engine Break‑in: Displays the time remaining on the break‑in period of a
new engine. This screen will automatically disappear after the break‑in
period is complete.

Maintenance Screen

Some 4‑stroke power package models have the ability to estimate the amount
of run time the engine accumulated since the last scheduled maintenance.
Normal scheduled maintenance for the engine is 100 hours. The maintenance
screen shows a bar graph approximating the amount of time remaining before
a scheduled maintenance is required. When the maintenance screen is reset,
the bar graph will change to represent the scheduled maintenance has 100
hours remaining. The maintenance screen must be turned on for this screen to
be displayed. Your owner's manual maintenance schedule should be followed
regardless of what the gauge displays. To turn this feature on, refer to
Tachometer Display Screens.
eng
SC 1000 TACHOMETER
1.5
65
%
43.5
FUEL
PSI
BREAK-IN TIME
65
MIN
LEFT
13
50353