Tachometer Settings - Screens - Mercury SC 1000 Operation And Maintenance Manual

Tachometer Settings ‑ SCREENS
This calibration turns the system screens on and off.
NOTE: Depending on the engine model and vessel options, not all screens will
apply.
1. Press the "MODE/SELECT" and "+" buttons simultaneously for
approximately four seconds or until the "SCREENS" screen appears
2. Press the "+" or "–" to change the settings.
3. Press "MODE/SELECT" to save the setting and advance through the
display screens.
SCREENS
QUICK REF SCREEN ?
[ NO ] [SAVE]
ENGINE TEMP SCREEN ?
[ NO ] [SAVE]
OIL TEMP SCREEN ?
[ NO ] [SAVE]
OIL PRESS SCREEN ?
[ NO ] [SAVE]
TRIM AND PSI SCREEN ?
[ NO ] [SAVE]
TRIM AND RPM SCREEN ?
[ NO ] [SAVE]
eng
SC 1000 TACHOMETER
The quick reference screen is displayed "YES"
for on or "NO" for off.
[ YES ]
23978
The engine temperature screen is displayed
"YES" for on or "NO" for off.
[ YES ]
23783
The oil temperature screen is displayed "YES"
for on or "NO" for off.
[ YES ]
23786
The oil pressure screen is displayed "YES" for
on or "NO" for off.
[ YES ]
23787
The split screen showing trim angle and water
pressure is displayed "YES" for on or "NO" for
[ YES ]
off.
23788
The split screen showing trim angle and
engine RPM is displayed "YES" for on or "NO"
[ YES ]
for off.
23979
17