Smart Tow; Cruise Control Operation - Mercury SC 1000 Operation And Maintenance Manual

Cruise Control Operation

NOTE: Cruise control is only available with 2007 and newer DTS engines.
30
20
10
0
b
1000
RPM SET
SMART
+ / - TO DISENGAGE
TOW ON
NOTE: The cruise control minimum maximum range may change depending on
engine model.
There are two modes of cruise control: "RPM MODE" and "SPEED MODE."
Set the cruise control to "RPM MODE" with either the Tachometer or
Speedometer. Launch control will inherit the mode of control selected.
IMPORTANT: Disengage Cruise/Smart Tow before making changes between
"SPEED MODE" and "RPM MODE."
Press and hold the "SELECT" button for approximately three seconds to toggle
between "SPEED MODE" and "RPM MODE."
The cruise control can be shut off at anytime by pressing the "+" and "–"
buttons simultaneously.
When the cruise control is engaged and the throttle is moved below the set
cruise engine RPM or speed, the engine RPM will decrease with the throttle
movement. When the throttle is moved above the set cruise speed, the cruise
control will actively control the engine speed to the set cruise speed.
When the cruise control is disengaged it will remember the set speed. It will
return to that speed when the cruise control is engaged and the throttle is
positioned beyond the set cruise speed.
Press "SELECT" twice to exit the cruise control screen.
eng

SMART TOW

40
50
60
70
80
SPEED
CRUISE
LAUNCH
a - Increase set cruise RPM
b - Decrease set cruise RPM
c - Set cruise RPM
a
c
53433
37