Vcr To Tv Connection (For Vr788/55); Vcr To Av Tv Connection Using Scart Cable (For Vr788/55) - Philips VR888/55 User Manual

VCR to TV Connection (For VR788/55 only)
Connection
Diagram
Outdoor antenna
Cable
CAUTION
Do not plug the AC power cords until all
connections are completed.
VCR to TV Connection Using the SCART Cable
With this connection, you can get better pictures and sounds when playing back a tape.
To watch a picture from this VCR on the
TV, select the correct video input on the TV,
to which this VCR is connected.
Use the appropriate SCART cable depending
on the TV's AV terminal.
VR788/888-55 NEW
1 Disconnect the antenna or Cable from the TV and the AC
power cord of the TV from the AC outlet.
2 Connect the antenna or Cable to the VCR.
3 Connect the VCR to the TV using the RF coaxial cable.
4 Plug the AC power cords of the VCR and TV into the AC out-
lets.
Indoor antenna
OUT
AV1. IN / OUT
Back of VCR
To watch a picture from this VCR on the TV, select UHF E36
channel (video channel of this VCR when shipped from the factory).
If you want to change video channel, see "Setting the Video Chan-
nel" .( P.12)
To AV1 IN/OUT terminal
— 11 —
11
ANT. IN
ANT. IN
RF OUT
RF coaxial cable
RF OUT
(supplied)
Back of VCR
OUT
ANT. IN
AV1. IN / OUT
RF OUT
SCART cable
6/3/99, 11:50 PM
Back of TV
VH F
UH F
Back of TV
To AV
terminal
OUT
IN: (Not used)