Table of Contents
Advertisement
To advance a still picture:
Press STILL/SLOW
or STILL/
PAUSE 8 again. Each time a button is
pressed, a still picture advance one
frame. Or,
For VR888/55 ONLY:
1 Press JOG/SHTL so that the JOG/
SHTL button lights up.
2 Rotate the jog dial clockwise (or
counterclockwise) to advance (or
reverse) a still picture frame by
frame, while the JOG/SHTL button
lights up.
To resume playback, press PLAY 3.
To view a slow motion picture
Press STILL/SLOW
(or STILL/
PAUSE 8 on the front panel) for more
than 2 seconds during playback.
To decrease the slow motion speed
(and reverse the slow motion
playback), press SLOW/BACK – (For
VR788/55) or press STILL/SLOW –
(For VR888/55).
To increase the slow motion speed
(and forward the slow motion
playback), press SLOW/FORWARD+
(For VR788/55) or press STILL/
SLOW + (For VR888/55).
To resume playback, press PLAY 3.
Notes:
• No sound comes out during special effect
playbacks.
• If you keep viewing slow motion and still
pictures for 5 minutes, the VCR
automatically stops to protect the tape
and video heads.
• During special effect playbacks, some
noise bars will appear on the TV screen.
Local TV (or Cable)
Local (USER)
Stations
VR788/888-55 NEW
Tracking Adjustments
Auto tracking
Each time a tape is inserted, auto
tracking starts working and
continuously analyses the signal to
adjust for optimum picture quality
during playback. So, there is no need
for you to minimize noises in most
tapes during playback.
Manual tracking
• During normal playback:
If auto tracking cannot eliminate
noises well during playback, press
CHANNEL 5 or ∞.
• During a slow motion picture:
Press CHANNEL 5 or ∞ to
minimize noises in the slow motion
picture.
• During a still picture:
Press CHANNEL 5 or ∞ to reduce
jitter in the still picture.
To cancel manual tracking, stop the
tape, eject the tape, then re-insert it.
SHOWVIEW Set Up
(FOR VR888/55 ONLY)
You can simplify the programming
method of timer recording by using
SHOWVIEW. Whenever you want to
record a TV program, all you need to
do is to find out the programme's
SHOWVIEW number.
SHOWVIEW Guide
Channel No.
Channel No.
19
You can easily find out this number by
checking the TV programme list of
your local newspaper or TV guide
magazine.
Simply entering the programme's
SHOWVIEW using the remote control
will make the VCR record the pro-
gramme.
Before using SHOWVIEW for the first
time, you need to set the guide channel
number for each local channel number.
The local channel number (USER
CH) is the number you select on the
TV or VCR to watch a programme,
while the guide channel number is the
one assigned to that local channel and
you can also find it in the TV pro-
gramme list of your local newspaper or
TV guide magazine.
Make sure....
• You can use the tables below to note
1
1 Press MENU.
2 Press 5 or ∞ to
2
1 Press 5 or ∞ to
2 Press CH 5/∞ or
• For example, for guide channel number 9,
Local TV (or Cable)
Stations
— 19 —
6/3/99, 11:51 PM
your local TV (or Cable) channel
numbers and their guide channel
numbers.
Select VCR Set Up Mode
SELECT
CHOOSE
SET CLOCK
LANGUAGE
GUIDE CHANNEL SET UP
select "INITIAL
SET UP" then
TO END PUSH EXIT
press OK/3.
Set Guide Channels
GUIDE CHANNEL SET UP
GUIDE CH
USER CH
select "GUIDE
254
255
CHANNEL SET
01
02
UP" then press
03
SELECT
OR ENTER GUIDE
OK/3.
CH. NO. THEN PUSH
TO END PUSH EXIT
Number buttons to enter guide
channel number (GUIDE CH) then
press OK/3.
press 0, 9.
SHOWVIEW Guide
Local (USER)
Channel No.
Channel No.
/OK
ENGLISH
--
01
02
03
04
/OK.
Hide quick links:
Advertisement
Table of Contents
