Table of Contents
Advertisement
4
Select Start Time
Press START + or –
ONE TIME PROGRAM
PROGRAM
CHANNEL+/–
(Number button 1 or 4).
START +/–
STOP +/–
• Each time you press
REC SPEED SP
DATE +/–
the button, the set
SET DAILY=8 OR WEEKLY=9
time changes by 1-
TO END PUSH EXIT
minute intervals. If you hold the button,
the set time changes by 30-minute
intervals.
5
Select Stop Time
Press STOP + or –
ONE TIME PROGRAM
PROGRAM
(Number button 2 or 5).
CHANNEL+/–
START +/–
• Each time you press
STOP +/–
REC SPEED SP
DATE +/–
the button, the set
time changes by 1-
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
minute intervals. If
you hold the button, the set time changes
by 30-minute intervals.
6
Select Tape Speed
Press SPEED.
ONE TIME PROGRAM
PROGRAM
• Each time you press
CHANNEL+/–
START +/–
the button, the tape
STOP +/–
REC SPEED LP
speed alternates
DATE +/–
between "SP", "LP",
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
and "SLP".
SP, LP : For PAL signal
SP, SLP : For NTSC signal
7
Select Start Date
Press DATE + or –
ONE TIME PROGRAM
PROGRAM
(Number button 3 or 6).
CHANNEL+/–
START +/–
• The year and day of
STOP +/–
REC SPEED LP
the week is displayed
DATE +/–
automatically.
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
8
Select Recording Type
If you want to record the same
programme daily, press DAILY
(Number button 8).
The VCR will record a TV programme
every day (Monday through Friday) at
the same time and length (Daily
Recording).
If you want to record the same
programme weekly, press WEEKLY
(Number button 9).
The VCR will record a TV programme
once a week at the same day, time, and
length (Weekly Recording).
If you want to cancel the currently
set programme, press CLEAR.
9
Confirm Programme
Press EXIT/STATUS.
"PROGRAM WAS COMPLETED"
appears on the TV screen.
After 5 seconds, the above message
disappears, and the normal TV picture
VR788/888-55 NEW
resumes. The
(Timer) indicator
lights up on the display.
• If "PROGRAM NOT COMPLETED"
1
appears, try again from step 1.
12
08 : 30
• If "PROGRAM NOT COMPLETED
– –:– –
CLASH" appears, the timer recording
07/04/98
you just programmed overlaps another
timer recording. The timer recording you
just programmed will not take place. The
timer recording menu will reappear.
If you want to store other
programmes, repeat steps 1 to 9.
10
Finish Settings
1
12
Press POWER to turn off the VCR.
08 : 30
09 : 30
The VCR must be turned off for a timer
07/04/98
recording to take place. If you forget to
turn off the VCR, "PLEASE TURN
OFF VCR FOR TIMER
RECORDING" flashes on your TV
screen two minutes before a timer
recording starts. To remove the
message, press the CLEAR button.
After a timer recording has
1
12
taken place
08 : 30
09 : 30
Press POWER to turn on the VCR.
07/04/98
You can operate your VCR normally.
To stop a started timer recording
Press POWER.
Recording stops and the VCR turns off.
If it is a Daily or Weekly Recording,
future recordings will be carried out as
programmed.
1
Useful function for Timer
12
08 : 30
Recording: Auto Tape Speed
09 : 30
07/31/98
With this function activated, the VCR
FRIDAY
can change the tape speed and record
the programme in SLP or LP mode
unless enough tape remains for
recording in SP mode.
1 Press VCR.
2 Press MENU.
3 Press 5 or ∞ to select "VCR SET
UP" then OK/3.
4 Press 5 or ∞ to select "TIMER REC
SPEED."
5 Press OK/3.
Each time you press the button, the
setting changes.
AUTO:
Select this to allow the VCR to
change the tape speed from SP to
SLP or LP when there is not
enough tape length remaining.
MANUAL:
Select this not to allow the VCR to
change the tape speed.
6 Press EXIT/STATUS to exit from
the menu operations.
To check, edit or erase the programmes
1 Turn on the VCR and TV.
— 21 —
21
2 Press VCR.
3 Press TIMER.
4 Press 5 or ∞ to
PR CH START STOP DATE
1 L–F 08:00
select
2 L–1 10:00
3
10 11:30
4
45 15:00
"PROGRAM
5
6
REVIEW" then
7
8
press OK/3.
NEXT=
The list of the timer recording
programmes appears.
5 Press OK/3 repeatedly to view the
more detailed programme informa-
tion.
• When you press the button for the first
time, the detailed programme
information for
ONE TIME PROGRAM
Programme 1
PROGRAM
CHANNEL+/–
appears. By
START +/–
STOP +/–
pressing this button
REC SPEED LP
DATE +/–
repeatedly, you can
SET DAILY=8 OR WEEKLY=9
review the detailed
TO END PUSH EXIT
information of all other programmes.
6 If you want to change the
programme setting shown on the
TV screen, press the following
buttons:
CH 5/∞
: Changes the channels.
START +/– : Changes the start time.
STOP +/– : Changes the stop time.
SPEED
: Changes the tape speed.
DATE +/– : Changes the date.
If you want to erase the
programme setting shown on the
TV screen, press CLEAR. The
detailed information of the next
programme appears.
7 Press EXIT/STATUS to exit from
the menu operations.
Note:
This function does not work for OTR (One
Touch Recording).
How to see the programme list
1 2 3 4 5
PR CH START STOP DATE
1
12 08:30
09:30 D07/04
2
13 10:00
10:45
MON
3
10 11:30
01:00 DAILY
4
45 15:00
15:15 W09/04
5
6
7
8
1
NEXT=
END=EXIT
Programme numbers
2
3
Preset channel numbers
Start time
4
Stop time
5
Start date
"D" stands for "DAILY," and "W"
stands for "WEEKLY."
• If the programme has worked
once for the Daily recording,
"DAILY" will be shown instead
of the start date.
• If the programme has worked
once for the Weekly recording,
the day of the week (in this
example, "MON") will be shown
instead of the start date.
6/3/99, 11:52 PM
10:00 D07/04
10:45
MON
01:00 DAILY
15:15 W09/04
END=EXIT
1
12
08 : 30
09 : 30
07/04/98
FRIDAY
Hide quick links:
Advertisement
Table of Contents
