Configuring A Trunk Module Or Combination Mbm; Deconfiguring A Trunk Module Or Combination Mbm - Nortel BCM450 Maintenance Manual

Configuring a Trunk Module or Combination MBM

You can configure BCM450 MBMs through Element Manager.
Prerequisites
• The BCM450 MBM must be installed in the system. For information about
replacing a BCM450 MBM, see
For information on installing a new BCM450 MBM, see
Communications Manager 450 Installation — System.
Procedure steps
Step
1
2
3
4
5
6
7

Deconfiguring a Trunk Module or Combination MBM

You can deconfigure BCM450 MBMs through Element Manager.
Prerequisites
• The BCM450 MBM must be installed in the system. For information about
replacing a BCM450 MBM, see
For information on installing a new BCM450 MBM, see
Communications Manager 450 Installation — System.
Step
1
Copyright © 2009 Nortel Networks
Action
In Element Manager, click Configuration > Resources > Telephony
Resources > Modules pane.
Select the module you want to configure or deconfigure.
Click on the Configured Device field. A menu appears.
Select the type of MBM you want configure.
Click Configure.
Enter the Start Line.
Click OK.
Action
In Element Manager, click Configuration > Resources > Telephony
Resources > Modules pane.
Business Communications Manager 450
Maintenance
NN40170-503 02.04 Standard
August 2009
BCM modules management 49
--End--
Replacing a media bay module (page
--End--
Replacing a media bay module (page
15).
Nortel Business
15).
Nortel Business