Blaupunkt BREMEN RCM 127 Operating Instructions Manual page 59

• Press << / >> to select the frequency band you wish to correct, e.g. 1 kHz.
The selected frequency band will appear in the bottom line.
• Press / to adjust the frequency range as desired.
After completing the adjustments, press
the front right, rear left and rear right.
If necessary, adjust the other channels as described above.
• Press EXIT to exit the menu.
Die letzte Einstellung ist automatisch gespeichert.
Note:
During the calibration procedure, loudspeakers should be hooked up to all four
connections.
If one of the loudspeakers is not detected during calibration because it is defec-
tive, not connected or obstructed, then a linear equalizer control will be done for
this loudspeaker pair.
The balance/fader settings can be adjusted in a limited range only.
Calling up the Hi-fi calibration
If you want the playback to function according to the Hi-fi calibration,
press S, EQ
• and the corresponding softkey (AUTO-EQ1 ... AUTO-EQ3)
one after the other.
DEUTSCH ENGLISH
NEXT and adjust the loudspeaker on
FRANÇAIS ITALIANO
S
SET
- -- -- -- -- -- -- -- -- -
NEXT
NEDERLANDS SVENSKA
AUTO-EQ 2
FRONT LEFT
1 k HZ EXIT
ESPAÑOL
CD - Betrieb (Option)
59
PORTUGUÊS