Blaupunkt BREMEN RCM 127 Operating Instructions Manual page 58

Use DNC for the preliminary check.
DNC-LEVEL OFF means linear frequency
DNC-LEVEL LOW means slight emphasis on bass sound
DNC-LEVEL MID means medium emphasis on bass sound
DNC-LEVEL HIGH means heavy emphasis on bass sound.
Press S, EQ
• one after the other.
Place the microphone in one of the positions.
• Press the corresponding softkey (AUTO-EQ1 ... AUTO-EQ3) for approxi-
mately 1 second.
PLEASE PLACE MICROPHONE 10 ... 0, the countdown has begun. The
calibration procedure will run automatically after the countdown.
Make sure that the surroundings are as quiet as possible during the calibration
procedure. Press STOP
As soon as the calibration procedure has been completed, AUTO-EQ READY ...
will appear in the display. The following question will appear in the display: ALL
BASS/TREBLE ADJUSTMENTS ARE SET TO "0".
YES or NO
• Press either
The calibration process for this setting has been completed.
Checking/altering Hi-fi calibration
If necessary, you can check or correct the automatic calibration for any of the
channels:
Press S, EQ
• one after the other.
• Press the corresponding softkey briefly (AUTO-EQ1 ... AUTO-EQ3). The
function selected, e.g. AUTO-EQ2 will be highlighted in the display.
Press VIEW EQ . VIEW AUTO-EQ 2 will appear in the display header,
•
for example. The display will indicate the equalizer settings for the front left
loudspeaker.
to abort the calibration if necessary.
.
S
AUTO-EQ ADJUST
PLEASE PLACE
MICROPHONE
10
S
AUTO-EQ READY
ALL BASS/TREBLE
ADJUSTMENTS ARE
SET TO "0"
YES
S
VIEW AUTO-EQ 2
FRONT LEFT
- -- -- -- -- -- -- -- -- -
NEXT
STOP
NO
EXIT
58