Blaupunkt BREMEN RCM 127 Operating Instructions Manual page 20

. . . with SCAN
The SCAN feature will briefly play all of the stations listed in the table displayed.
FM SCAN
If the reception table is displayed, all of the FM stations within reception range
will be scanned.
If the preference table is displayed (display header highlighted), all of the stored
FM stations will be scanned.
Start SCAN:
• Press SCAN.
The display will indicate the station name, or if no RDS signal is received, the
frequency of the station being scanned. SCAN will appear in the display header.
End SCAN:
• Press EXIT , the last station scanned will begin normal play.
MW/LW SCAN
If the preference table is displayed (display header highlighted), all of the stored
stations will be scanned.
In the SEARCH menu it is possible to scan all of the stations currently within
reception range.
Select the corresponding menu.
Select preference table:
• Press TU, MW or LW.
S
NDR1 NDS
SEARCH
SCAN
ANTENNE
MDR LIFE NDR1 NDS
BROCKEN
S
S C A N
NDR 3
S
756
FM
MW
LW
HR 1
HR 3
NDR 2
NDR 3
EXIT
20