Blaupunkt BREMEN RCM 127 Operating Instructions Manual page 48

• Press TPM until you hear a beep.
The track has been stored. TPM PROGRAMMED will appear in the display head-
er.
Select the next track and store it by pressing
You can store tracks at any time while they are being played. Both TPM and
SCAN must be switched off.
CD playback with TPM
The TPM function must be switched on (TPM appears highlighted in the display).
The tracks stored with TPM will be played in ascending order. Any tracks which
have not been stored will be skipped.
If a CD without TPM is selected while TPM is active, then NO TPM ON DISC
will appear in the display header. This CD will be played back normally. TPM will
be active again for the next CD selected automatically.
Deleting the TPM memory (TPM CLR)
Using TPM CLR (clear) you can delete individual tracks, all of the tracks on one
CD, all of the tracks on the magazine currently inserted or all of the magazines.
If the TPM memory is empty, NOT MEMORIZED will appear in the display head-
er.
Select the changer functions menu. If necessary,
• press CDC.
a) Deleting the TPM memory for one track:
• Select the track by pressing
• Press TPM CLR for approximately 1 second. TPM TRACK CLRD
will appear in the display header. You will hear a beep at the same time.
This track has been deleted in the TPM memory.
TPM etc., as described above.
/ .
S
TPM PROGRAMMED
MIX CDC NAME
SCAN
REPEAT
TPM
TPM CLR
S
DISC 01 TR 02
MIX CDC NAME
SCAN
REPEAT
TPM
TPM CLR
S
TPM TRACK CLRD
MIX CDC NAME
SCAN
REPEAT
TPM
TPM CLR
TIME
TIME
TIME
48