Table of Contents
Advertisement
Advertisement
Chapters
Table of Contents
Related Manuals for Blaupunkt BARCELONA RCM 104 A
Summary of Contents for Blaupunkt BARCELONA RCM 104 A
- Page 1 Operating instructions Barcelona RCM 104 A...
- Page 2 15 14 13...
-
Page 3: Table Of Contents
Table of contents Quick instructions ... 27 Important notes ... 31 What you really have to read ... 31 Traffic safety ... 31 Installation/connection ... 31 Optical indication of theft protection .. 32 KeyCard ... 32 Replacing a KeyCard ... 32 Selecting the operating mode ... -
Page 4: Quick Instructions
Quick instructions 1 Switching on: Press the ON button (the KeyCard has to be inserted), the set plays with the pre-adjusted volume. Switching off: Press ON for approximately 1 second. If the set was turned on by pressing ON, the KeyCard can be used for swit- ching the system on and off. - Page 5 6 Rocker switch Radio operation Station search down in short up in short intervals intervals (when AF is off) (when AF is off) down Tape operation Select title in forwards direction Fast Fast rewind forward Select title in backwards direction To stop the function: Press the opposite button.
- Page 6 the corresponding slot above the Key- Card tongue. Read also the information given in the “KeyCard” chapter. 9 AF button (alternative frequency) du- ring RDS operation When “AF” lights up in the display, the system will automatically seek a fre- quency offering better reception of the same RDS program.
- Page 7 @ Eject button Press A Cassette loading slot Insert tape (side A or 1 facing up, the open side showing to the right). B Tape side selector Press to switch over during tape operation. The display shows “TR 1” (track) or “TR 2”. C MIX see chapter “CD changer control”.
-
Page 8: Important Notes
I GEO To adjust the Balance (left/right) and Fader (front/rear) settings. Fader front Balance Balance left right Fader rear The last setting will be stored automati- cally. If the setting remains unchanged within 8 seconds, the display will switch back to be previous indication. -
Page 9: Optical Indication Of Theft Protection
Do not connect the loudspeaker outputs to ground! Use only the accessory and replacement parts approved by Blaupunkt. Optical indication of theft protection When the car is stationary, you can let the KeyCard tongue flash in order to indicate that the set is equipped with security coding. -
Page 10: Selecting The Operating Mode
Selecting the operating mode With the SRC (source) button you can select between the following modes: radio, tape, CD changer (option), or operation of another audio component connected. To select one of the operating modes, it is of course necessary that the corresponding system is available, i.e. -
Page 11: Reg - Regional
Should the reception quality of the selected program become too bad, • tune into another program. REG - Regional Certain radio programs are split up at times into regional programs offering local informa- tion. If you are listening to one program and move to an area where another linked regio- nal program becomes stronger, the unit will switch to that program. -
Page 12: Changing The Memory Bank (Fm)
Changing the memory bank (FM) You can shift between the memory banks I, II, and “T” to store and to recall preset stations. The selected memory bank is indicated in the display. • Press FM until the desired memory bank lights up in the display (press re- peatedly if necessary). -
Page 13: Scanning Stations With Radio Scan
Scanning stations with Radio Scan Beginning with the station currently tuned in, you can scan the following stations. Choose the desired SCANTIME in the DSC menu. To activate the scan: • Press PS for about 2 seconds. Either the scanned frequency or the station name starts flashing in the dis- play. -
Page 14: Station Naming
b) Using the << >> rocker switch If PTY is switched on, you can select a program type via the << >> rocker switch. • Press << or >>. The PTY selected last will be displayed for three se- conds. •... -
Page 15: Reception Of Traffic Announcements With Rds-Eon
• Use the rocker switch << >> to move to the next position and select a charac- ter. In this way, up to 8 characters can be en- tered. Once you have completed the name as desi- red, • press -dB; now the entry has been stored. -
Page 16: Automatic Seek Tuning Start
Automatic seek tuning start Prerequisite: The priority for traffic announcements is ac- tivated. If you leave the reception area of your traffic program while listening to a tape or disc or when having turned down the volume completely, the car radio will automatically tune into another traffic program station. -
Page 17: Setting The Time In The Dsc Menu
When pressing TIM once again, you will hear the message text recorded until that interrup- tion. Setting the time in the DSC menu: TIM needs the exact time in order to operate precisely. The time also has to be re-adjusted after every interruption of the power supply. -
Page 18: Rt - Radiotext
TIM is deactivated (TIM OFF), if the motor antenna is retracted as soon as the set is turned off. You can now drive through a car wash when the radio is off. Do not switch on the radio until you have left the car wash. -
Page 19: Tape Operation
Tape operation In order to play a tape, the car radio has to be switched on. The unit automatically switches to tape ope- ration when a cassette is inserted. Inserting a tape • Turn on the set. • Insert the cassette. The cassette is automatically transported to the playback position. -
Page 20: Scanning Cassette Titles With Scan
Scanning cassette titles with SCAN You can have the cassette titles played briefly by using the scan func tion. If you like a title, stop the scan to continue listening to that track. To start/stop the scan: • Press PS briefly. Choose the desired SCANTIME in the DSC menu. -
Page 21: Dsc Programming
DSC programming Using DSC (Direct Software Control), you can adjust certain settings and functions for this car radio to your own liking and then store them. The basic settings for this audio equipment have been made at the factory. Please refer to the following overview for these settings so that you can always reset to these if desired. -
Page 22: Beep
BEEP This sound will confirm functions which are comple- ted by pressing a button for longer than 2 seconds. Adjust volume between 0 and 9 (0 = OFF). BRIGHT You can adjust the display brightness from values bet- ween 1 and 16. You can also select one day and one night adjustment. -
Page 23: S-Lo 1
S-LO 1 Use this function to adjust the seek tuning sensitivity for local reception. LO 1 - high sensitivity LO 3 - low sensitivity The seek tuning sensitivity values can be separately adjusted for AM and FM. SPEECH In future many RDS broad- casters will differentiate bet- ween music and speech programs. -
Page 24: Cd Changer Control (Option)
CD changer control (option) This car radio allows it to remote control one of the following Blaupunkt CD changers: CDC-A03, -F03, -A05, -F05. Switching the CD mode on using SRC of the car radio Be sure that a CD magazine is inserted in the changer. -
Page 25: Entering/Displaying Cd Names
Entering/displaying CD names With this system you can name up to 99 CDs. When playing a CD, the dis play will then give you the entered name, for example “VIVALDI”. Precondition: NAME must be selected under DSC - CD DISP. To enter the name: First, switch off the priority for traffic an- nouncements. -
Page 26: Survey Of Dsc Default Settings
Survey of DSC default settings TIME 00:00 ANGLE BEEP BRIGHT COLOUR Medium position (orange) CDC DISP NAME LOUDNESS PTY LANG DEUTSCH PTY SET NACHRICH (TEN) SCANTIME S - DX S - LO SPEECH TA LEVEL TIM TIME 07:00 VOL FIX Appendix Technical data Amplifier:... - Page 27 Blaupunkt-Werke GmbH Bosch Gruppe 1/95 K7/VKD 3 D94 147 028...