Uninstalling The Dedicated Software; Uninstalling The Windows Dedicated Software; Uninstalling The Mac Dedicated Software; Opening The Settings Panel - Tascam 12 Owner's Manual

The file still might not open and "'ModelMixer_Installer.pkg'
can't be opened because it was not downloaded from the
Mac App Store. " might appear again.
In this case, copy the file from the folder where it is to the
desktop or another folder, and then open it. Alternatively,
change the Gatekeeper settings to "Allow apps downloaded
from: App Store and identified developers" and try opening
it again.
When the Gatekeeper setting is "Allow
applications downloaded from: the Mac App
Store"
"'TASCAM_MODEL MIXER_Installer_x.xx.dmg' is an
application downloaded from the Internet. Are you sure
you want to open it?" might appear as a security warning
message. In this case, click the "Open" button.
Changing the Gatekeeper setting
The Gatekeeper setting can be changed using the "Allow
applications downloaded from:" item on the "General" page
of the "Security & Privacy" pane of the System Preferences.
To change this, you must click the lock icon (
bottom left and enter a password to unlock the settings.
This setting will lock again when you close the System
Preferences by clicking the
for example, or when you click "Show All" to close the open
pane.
ATTENTION
Changing the Gatekeeper settings could result in
securityrisks.
If you changed the Gatekeeper setting to decrease security
(use one of the lower settings), set it back to the original
setting after updating the driver and/or firmware.
12 - USB audio interface functions
) at the
button or typing command-Q,

Uninstalling the dedicated software

NOTE
Normally, there is no need to uninstall the dedicated
software. Follow these procedures if a problem occurs or you
no longer intend to use the unit with the computer.
Uninstalling the Windows dedicated
software
1.
Open the "Uninstall or change a program" screen using the
procedures for the operating system being used (Windows
10/Windows 8.1/Windows 7).
2.
Select "TASCAM Model_Mixer x.xx" from the list, and
double-click it.
3.
Then, follow the instructions that appear on the screen.

Uninstalling the Mac dedicated software

Delete "TASCAM Model_Mixer" from the Application folder to
complete uninstallation.

Opening the Settings Panel

Open the Settings Panel in the following manner.

Windows

o From the "Start" menu select "TASCAM Model Mixer" under
"TASCAM"

Mac

o On the Launchpad, click "TASCAM Model Mixer" .
o Using the Finder, open the Applications folder and click
"TASCAM Model Mixer" to open the Settings Panel.
o In the Audio Devices window of the Audio MIDI Setup
application, control-click (right-click) "TASCAM Model Mixer".
Alternatively, click the button and click "Configure device..."
from the menu that appears to open the Settings Panel.
55
TASCAM Model 12