Adjusting The Display; Adjusting The Display Contrast; Adjusting The Display Brightness; Preparing An Sd Card For Use - Tascam 12 Owner's Manual

3 - Preparation

Adjusting the display

The display contrast and brightness can be adjusted.

Adjusting the display contrast

1.
When the recorder is stopped, select DISPLAY on the
SYSTEM Screen, and open the DISPLAY Screen. (see "Menu
operation procedures" on page 21)
2.
Adjust the display contrast.
Options: 10–40 (default: 28)
3.
Press the MULTI JOG dial to confirm the setting.
4. Press the F1
button to return to the SYSTEM Screen.

Adjusting the display brightness

1.
When the recorder is stopped, select DISPLAY on the
SYSTEM Screen, and open the DISPLAY Screen. (see "Menu
operation procedures" on page 21)
2.
Press the MULTI JOG dial to move the cursor to the DIMMER
item.
3.
Adjust the display brightness.
Options: HIGH (default), LOW
4.
Press the MULTI JOG dial to confirm the setting.
Press the F1
5.
button to return to the SYSTEM Screen.
26
TASCAM Model 12

Preparing an SD card for use

In order to make an SD card usable in this unit, whether for
recording or playback, this unit must be used to create a system
file on it first.
ATTENTION
In order to record, this unit must be used to format it first.
(see "Formatting SD cards" on page 49)
1.
"No sys file. Make sys file. Are you sure?" appears in a pop up
when a new card or a card formatted by another device is
inserted into the unit.
2.
Press the MULTI JOG dial to create a system file.
When system file creation is complete, the Home Screen
will reopen.