About Sd Cards; Precautions For Use; Sd Card Write Protection; Note About Formatting - Tascam 12 Owner's Manual

1 - Introduction

About SD cards

This unit uses SD cards for recording and playback.
This unit can use SD cards that are Class 10 or higher and
compatible with SD, SDHC or SDXC standards.
A list of SD cards that have been confirmed for use with this unit
can be found on our web site. Please access to a product page of
this product from the TEAC Global Site (http://teac-global.com)
to find the list or contact the TASCAM customer support service.

Precautions for use

SD cards are delicate media.
In order to avoid damaging SD cards, please take the following
precautions when handling them.
o Do not leave them in extremely hot or cold places.
o Do not leave them in extremely humid places.
o Do not let them get wet.
o Do not put things on top of them or twist them.
o Do not hit them.
o Do not remove or insert them during recording, playback,
data transmission or other access.
o When transporting them, put them into cases, for example.

SD card write protection

This unit writes track information to the media in order
to improve operation performance. Since, for example,
setting information cannot be written to SD cards that are
writeprotected, settings will not be retained when the unit is
restarted and performance will be otherwise affected.

Note about formatting

SD cards formatted by this unit are optimized to improve
performance during recording. Use this unit to format the SD
cards to be used with it. Errors might occur when recording with
this unit using an SD card formatted by a computer or other
device.
10
TASCAM Model 12
Bluetooth®
This unit has a built-in Bluetooth audio receiver, and can input
sound played on a computer or portable audio device that
supports Bluetooth (Bluetooth device).
ATTENTION
The Bluetooth function of this unit is not guaranteed to
enable connection or operation with all Bluetooth devices.

Profiles

This unit supports the following Bluetooth profiles.
o A2DP (Advanced Audio Distribution Profile)
In order to transfer audio by Bluetooth, the Bluetooth device
must support A2DP.
Even if a Bluetooth device supports the same profiles, though,
its functions might differ according to its specifications.

Codecs

This unit supports the following codecs. It will automatically
select one of them during audio transfer.
o SBC
o AAC
The unit will select the appropriate codec to use according
to the codec compatibility of the other Bluetooth device and
communication conditions.
NOTE
i You cannot select the codec to be used by pressing a button,
for example.
i Due to characteristics of Bluetooth wireless technology,
playback from this unit will be slightly delayed compared to
playback from the Bluetooth device.

Content protection

This unit supports SCMS-T as a form of content protection when
transmitting audio, so it can play protected audio.

Transmission security

This unit supports security functions during Bluetooth
transmission in accordance with the Bluetooth standard
specifications, but it does not guarantee the privacy of such
transmissions.
TEAC CORPORATION will bear no responsibility should an
information leak occur during transmission by Bluetooth.