Analog Output Adjustment Section - Tascam 12 Owner's Manual

2 - Names and Functions of Parts

Analog output adjustment section

$ MUTE switch and indicator (FX)
When the MUTE switch are on (pushed in, MUTE indicator lit),
the signal from the built-in effect is muted.
% MUTE switches and indicators (SUB, MAIN)
When MUTE switches are on (MUTE indicators lit), signals to
the SUB OUTPUT/MAIN OUTPUT jacks are muted.
^ TEMPO indicator
i This lights green when a song that has click sound output
set is loaded.
i When the metronome is operating, it lights or blinks as
follows. (see "Metronome functions" on page 41)
Indicator color Meaning
This color lights on the first beat of
Red
the setting
Green This blinks at the set tempo
& CLICK button
i When the EFFECT screen is open, tap this button
repeatedly at the desired speed to set the delay of the
built-in effect. (see "Setting the built-in effect" on page
33)
i When the TAP TEMPO screen is open, tap this button
repeatedly at the desired tempo to set the metronome.
(see "Making metronome settings" on page 42)
i Press this button when the metronome is stopped to start
it at the set tempo. Press this button when the metronome
is on to stop it. (see "Starting and stopping the metronome
manually" on page 43)
* FX fader
Use to adjust the levels of signals sent from the built-in effect
to the following buses.
i MAIN MIX L/R bus
i SOLO L/R bus
i AUX1 bus
i SUB L/R bus
( TO AUX 1 knob
Use these to adjust the levels of signals sent from the built-in
effects to the AUX1 bus.
16
TASCAM Model 12
) SELECT button
Open the EFFECT Screen and make built-in effect settings.
(see "Using the built-in effects" on page 33)
The built-in effect return signal is sent to the following buses.
i MAIN MIX L/R bus
i SOLO L/R bus
i AUX1 bus
i SUB L/R bus
Q MAIN switch (FX)
When this switch is on, signals from the built-in effect are
sent to the MAIN MIX L/R bus.
W SUB switch (FX)
When this switch is on, signals from the built-in effect are
sent to the SUB L/R bus.
E AFL switch (FX)
When this switch is on, signals from the built-in effect are
sent to the SOLO L/R bus.
When this switch is on, the sound of the SOLO L/R bus can be
heard with headphones.
R POST REC switch
Select the send position of the signal recorded to the SD
card.
When this switch is on, signals from after the MAIN fader are
recorded to the SD card.
T AUX 1 switch (FX)
When this switch is on, signals from the built-in effect are
sent to the AUX1 bus.
Y MAIN switch (SUB)
When this switch is on (pushed in), the SUB OUTPUT jack
output signal is sent to the MAIN MIX L/R bus.
U SUB fader
Use to adjust the output level of the SUB OUTPUT jacks.
I MAIN fader
Use to adjust the output level of the MAIN OUTPUT jacks.