Swapping Tracks; Stereo Mix Export Function - Tascam 12 Owner's Manual

• If the sampling frequency of the WAV file you are trying to
import differs from the current song
Example: Trying to import a 48kHz WAV file when the
current song is 44.1kHz
i If there is no file that can be imported, a "No File" pop-up
message will appear.
Select the track to import, and press the F4
9.
to import it.
When importing completes, the TRACK IMPORT Screen
reopens.
NOTE
i Press the F1
button to cancel importing.
i The part of the track imported before canceling will remain; it
will not be deleted.

Swapping tracks

Recorded tracks can be swapped with other tracks.
1.
When the recorder is stopped, select MTR on the MENU
Screen, and open the MTR Screen. (see "Menu operation
procedures" on page 21)
2.
Select TRACK EDIT on the MTR Screen, and open the TRACK
EDIT Screen.
3.
Select TRACK SWAP on the TRACK EDIT Screen, and open
the TRACK SWAP Screen.
4.
Turn the MULTI JOG dial to select a track.
Options: 1 (default), 2, 3, 4, 5, 6, 7, 8, 7/8, 9, 10, 9/10, 11, 12,
11/12
5.
Press the MULTI JOG dial to move the cursor to the B item.
6.
Turn the MULTI JOG dial to select a track.
Options: 1 (default), 2, 3, 4, 5, 6, 7, 8, 7/8, 9, 10, 9/10, 11, 12,
11/12
Press the F4
7.
button to swap the track specified in
the A and B items.
NOTE
This can be used as a basic bounce function by swapping the
signals recorded on tracks 11/12 (the output from the MAIN
OUTPUT connectors) to other tracks, and then clearing all the
other tracks.

Stereo mix export function

MAIN MIX L/R bus recording files (mono) can be converted to a
single stereo file.
Converted stereo files are saved in the "MUSIC" folder.
Saved files are named according to the song name. For example,
button
the file name will be "181228_0002_2-MIX_01.wav" if the song
name is "181228_0002".
If the size of the converted file would exceed 2 GB, multiple files
will be created with numbers like "02" and "03" at their ends.
1.
Load the song to be exported as a stereo mix in advance.
For details about loading songs, see "Loading Songs" on
page 28.
2.
When the recorder is stopped, select STEREO MIX EXPORT
on the MENU Screen, and open the STEREO MIX EXPORT
Screen. (see "Menu operation procedures" on page 21)
Press the F4
3.
NOTE
i If a converted file already exists, a message to confirm
overriding appears.
Press the F3
conversion. This operation cannot be undone.
i Conversion is not possible if no MAIN MIX L/R bus file has
been recorded. The message shown below will appear.
i During conversion, press the F1
conversion. A file with the part converted before canceling
will remain.
4.
When conversion completes, the MENU Screen will reopen.
NOTE
Converted files can be played using this unit's SD PLAY
mode. For details about playback with the SD PLAY mode,
see "Playing WAV files on SD cards (SD PLAY mode)" on page
50.
7 - Track editing
button to start conversion.
button to delete the existing file and start
button to cancel
TASCAM Model 12
39