Table of Contents
Advertisement
Once at the zero datum the differential pressure is determined by the weight applied and
the piston area, thus giving a primary standard for differential pressure. WinPrompt
software manages the calculations for these conversions and can also be used to
compensate for other environmental factors.
If a small incremental pressure change is desired, the program can thermally control the
pressure to leave a small residual weight on the Balance. This residual weight is added to
the applied weight. For small increments, the induced errors on the Balance will have
negligible effect on the overall accuracy.
Installation
Minimum Requirements
To install the RUSKA 2482, the following are required:
•
A sturdy workbench able to safely support the additional weight of the
RUSKA 2482 with accessories, approximately 45 kg (100 lbs)
•
PC computer with Microsoft
disk space available, 256 kb RAM available, RS-232 serial port
(USB to RS-232 adapter is acceptable)
•
Refer to Specifications for additional environmental, power, media, and supply
gas requirements.
Unpacking
1. Carefully remove all packaged items from the shipping box and place the
RUSKA 2482 on the workbench.
The following items will be included with the package:
•
RUSKA 2482 main chassis
•
RUSKA 2482 User's Manual
•
WinPrompt
•
Hand pump assembly and pump spindle handles
•
Two flexible hoses
•
Accessories kit
•
Power supply and power cord
2. Inspect the instrument for any shipping damage. If any damage is discovered, notify
the shipping company immediately.
3. Save specialized packaging for future shipping and/or storage requirements.
®
Windows
®
software Version 2R20 or later
Differential Pressure Piston Gauge
®
2000 or XP, 400 MHz, 1.6 MB hard
Installation
®
5
Advertisement
Table of Contents
