5. OUTBOARD MOTOR
INSTALLATION
Motor Slection
• For secure and safe sailing, install the outboard
motor on the transom of the boat properly.
Improperly install outboard motor result in the
displaced outboard motor, lack of speed and
stability, and poor fuel economy. In addition, the
boat does not drive straight unless the outboard
motor is installed properly.
• Install the outboard motor that conforms to the boat
manufacturer's recommended horsepower.
Never install an outboard motor which exceeds the
recommended maximum horsepower of the boat.
MAXIMUM HORSEPOWER:
BF75D: 55.2 kW (75 PS)
BF90D: 66.2 kW (90 PS)
• Install the outboard motor in an adequate place
where it does not hinder your operating the outboard
motor during tilt-up and steering. Refer to the
drawings shown below and on the following page for
the dimensions of the outboard motor.
Dimensions of the outboard motor
during tilt-up and steering
[Long Tiller Handle Type]
AT 30˚ STEERING:
1,411 (55.6)
AT 68˚ TILT UP:
(Boat transom angle: 12˚)
76.2
(3.0)
904 (35.6)
746 (29.4)
621.4 (24.5)
L type: 979 (38.5)
X type: 1,097 (43.2)
13
Unit: mm (in)
454.8
(17.9)
153
(6.0)
12˚
531
(20.9)