Table of Contents
Advertisement
Removal and Replacement Procedures
9. Remove the screw on the side (1) and 10 screws on the front (2) securing the hard drive
cage to the chassis with a T-15 Torx screwdriver.
10. Pull the hard drive cage out from the chassis (3).
Figure 2-25: Removing the SCSI hot-plug hard drive cage
To replace the SCSI hot-plug hard drive cage, reverse steps 2 through 10.
When installing the hard drive cage in the chassis, be sure that the hard drive cage is seated
properly on the supporter.
2-26
HP CONFIDENTIAL Codename: Stone Soup 2 Part Number: 368148-003 Last Saved On: 6/10/05 4:28 PM
HP ProLiant ML150 Generation 2 Server Maintenance and Service Guide
Advertisement
Table of Contents
