Table of Contents
Advertisement
Removal and Replacement Procedures
3. Open the bezel door fully to the right (1).
4. Lift the bezel door and then pull it away from the chassis (2).
Figure 2-2: Removing the bezel door
To replace the bezel door, reverse steps 3 through 4.
NOTE: There is an EMI shield attached to the back of the bezel door for the SCSI non-hot-plug model.
To remove the EMI shield, remove the four screws securing the shield to the bezel door.
HP ProLiant ML150 Generation 2 Server Maintenance and Service Guide
2-7
HP CONFIDENTIAL Codename: Stone Soup 2 Part Number: 368148-003 Last Saved On: 6/10/05 4:28 PM
Advertisement
Table of Contents
