Superior Fireplaces TF18NR Installation And Operation Instructions Manual page 24

EMBER PLACEMENT
WARNING: Do not use any other ember
material not supplied with this unit.
WARNING: Do not operate unit without
ember material correctly in place as shown
in Figures 49 and 50. Do NOT place ember
material anywhere else on the unit. Use
only ember material supplied with unit.
Excessive or incorrectly placed ember
material may produce carbon monox-
ide or soot. If replacement embers are
needed, the replacement embers must
be purchased from IHP. See Page 37 for
part numbers.
WARNING: ALL PREVIOUSLY AP-
PLIED LOOSE MATERIAL MUST BE RE-
MOVED PRIOR TO REAPPLICATION.
Ember Material
Glowing Embers
Figure 50 - Placement of Glowing Embers (shown with Platinum Bright Embers)
24
INSTALLATION
Continued
1. Two ember materials are supplied with this log
set. Platinum Bright Embers give a bright glow
appearing as hot coals.
need replacing, see Parts, Page 37.
Platinum Bright Ember placement. Add em-
bers to front, fl at burner. Gently remove embers
from bag. Separate pieces of ember material
and place on surface of fl at burner just behind
horizontal ports as shown in Figure 49.
Glowing Embers placement. Place Glowing
Embers material on front fl at burner in areas
away from ports as shown in Figure 50.
2. Add Volcanic Stone and small decorative logs
around base of appliance if desired. DO NOT
place rock or additional logs on front burner
or on logs. Placing any material on unit other
than ember material on front burner may result
in production of carbon monoxide or soot. Use
Volcanic Stone to hide wires from switch/log to
control valve. Place switch/log so the switch is
easy to access.
Figure 49 - Platinum Bright Embers
SuperiorFireplaces.us.com
Should embers
Flat Front Burner
126816-01F