Baud Rate - ResMed S8 Elite System Clinician Manual

338210r3 Eng.book Page 28 Monday, July 11, 2005 1:28 PM
Menu Parameter
Erase Data?
Date
Time
Menu Type
Language*
Servicing Run Hours*
SN*
PCB*
SW*
BR
* These parameters may appear in one or both patient menus and the clinical menu.
†
More detailed data is available via your PC application.
Note: When Leak Alert is set to ON, SmartStart/Stop is automatically set to OFF.
SmartStart/Stop cannot be used with Leak Alert because, if a high leak occurs, SmartStop
may stop treatment before the Leak Alert signal is activated.
S
ETTINGS FOR
The following table shows the setting that should be selected for each mask type.
Table 4: Settings for mask types
Settings
ULTRA
MIR FULL
ACTIVA
SWIFT
28
Description
Allows the clinician to erase all data stored in the
device (except for Run Hours).
Settings are not affected.
Sets the current date.
Sets the current time.
Sets the menu that the patient will see: standard
(STD) or detailed (ADV).
Sets the display language.
Displays the total number of machine hours.
(View only)
Displays the device serial number.
(View only)
Displays the printed circuit board number.
(View only)
Displays the current software version.
Sets the baud rate. This value is reset to 19200 every
time the S8 Elite is powered up.
M T
ASK YPES
Mask
Ultra Mirage Nasal Mask
Mirage Full Face Mask
Mirage Full Face Mask Series 2
Ultra Mirage Full Face Mask
ResMed Hospital Full Face Mask
Mirage Activa Nasal Mask
Mirage Swift Nasal Pillows System