Programmable Multiband Amplifier
TMB 200 & TMB 200S
Connect your USB cable between the unit and the keypad. After boot process the display shows
TMB200/Setup and the LED in on. Press a button to access the menus.
Keypad in standby mode (the display shows time and date), press a button to access the menus.
System menu
This allows to:
show firmware version
update the firmware
go back to factory settings
import or export a configuration
limit the UHF channels at channel 60
display the internal temperature
set clock and date
Press the Menu button a while to quit the System Menus.
System menu access.
Keypad in standby mode, press a button to access to SETTINGS/Config.
Press the Menu button to access to system menu.
Display shows the firmware version
Settings
Menu
/ Config
p
To scroll through the other menus, use or buttons.
Firmware update.
Settings
Menu
/ Config
p
scroll through the menus with button or until display shows Firmware upload
Press Menu button to start the function
Select the file name (an USB stick must be connected on the keypad and a DTMB_00x file must
be available in root directory)
Confirm by pressing Menu
Wait until display shows Firmware upload
Notes:
side 8 : how to get the System menu.
Press the Menu button a while to quit the System Menus.
awi -july 14
Firmware
14a23
p
Firmware
Firmware
Menu
upload
DTMB_00x
p
Factory
Factory
Menu
Reset
wait
p
Firmware
14a23
p
Firmware
Firmware
Menu
upload
DTMB_00x
p
Factory
Factory
Menu
Reset
wait
p
Firmware 14a23
Firmware upload
Factory reset
Import/Export
LTE 21-60
Temp.
Clock Setup
Firmware
Menu
wait
Firmware
Menu
wait
8
Firmware
Firmware
[ == > ]
Complete
Firmware
Firmware
[ == > ]
Complete
TMB 200-V1