DeWalt DW626 Instructions Manual page 29

Residual Risks
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing
– Risk of personal injury due flying particles.
– Risk of burns due to accessories becoming hot
during operation.
– Risk of personal injury due to prolonged use.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
DATE CODE POSITION (FIG. 1)
The Date Code (z), which also includes the year of
manufacture, is printed into the housing.
Example:
2010 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Router
1 Dust extraction adapter
1 Parallel fence with fine adjustment and guide rods
1 Collet (1/4")
1 Collet (1/2")
1 Guide bush diameter 30 mm
1 Spanner # 22
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. On/off switch
b. Handle
c. Speed control dial
d. Parallel fence
e. Fine adjuster for parallel fence
f. Guide rods for parallel fence
g. Router base
h. Dust extraction adapter
i. Collet nut
j. Spindle lock
k. Revolver depth stop
l. Depth stop
m. Depth stop locking bolt
n. Depth stop adjuster
o. Graduation
INTENDED USE
Your high performance DW626 router has been
designed for professional heavy duty routing wood,
wood products and plastics.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These routers are professional power tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
Soft Start Feature
The soft start feature allows to build up speed
slowly, thus preventing the cutter from walking off
the intended position when starting. The soft start
feature also reduces the immediate torque reaction
transmitted to the operator.
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your D WALT tool is double insulated in
E
accordance with EN 60745; therefore no
earth wire is required.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D WALT service organisation.
E
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in
the plug.
EN GL IS H
27