Driving Procedures; Engine (Ignition) Switch - Lexus RX350 Manual

176

4-2. Driving procedures

4-2.Driving procedures

Engine (ignition) switch

Performing the following opera-
tions when carrying the electronic
key on your person starts the
engine or changes engine switch
modes.
Starting the engine
1 Check that the parking brake is set.
2
Check that the shift lever is in P.
3
Firmly depress the brake pedal.
and a message will be displayed on
the multi-information display.
If it is not displayed, the engine cannot be
started.
4
Press the engine switch shortly and
firmly.
When operating the engine switch, one
short, firm press is enough. It is not neces-
sary to press and hold the switch.
The engine will crank until it starts or for up
to 30 seconds, whichever is less.
Continue depressing the brake pedal until
the engine is completely started.
The engine can be started from any engine
switch mode.
Engine switch illumination
■
According to the situation, the engine
switch illumination operates as follows.
● When a door is opened, or the engine
switch mode is changed from ACCES-
SORY or IGNITION ON mode to off,
the engine switch illumination slowly
blinks.
When depressing the brake pedal with
●
carrying the electronic key on your per-
son, the engine switch illumination rapidly
blinks.
● When the engine switch is in ACCES-
SORY or IGNITION ON mode, the
engine switch illumination illuminates.
If the engine does not start
■
● The engine immobilizer system may not
have been deactivated. (P.64)
Contact your Lexus dealer.
● Check that the shift lever is securely set in
P. The engine may not start if the shift
lever is displaced out of P. "To Start Vehi-
cle, Put Shift Lever into P" will be dis-
played on the multi-information display.
■ Electronic key battery depletion
P.94
Conditions affecting operation
■
P.114
Note for the entry function
■
P.115
Steering lock function
■
● After turning the engine switch off and
opening and closing the doors, the steer-
ing wheel will be locked due to the steer-
ing lock function. Operating the engine
switch again automatically cancels the
steering lock.
● When the steering lock cannot be
released, "Steering Wheel Lock Press
Engine Switch while Turning Wheel" will
be displayed on the multi-information dis-
play.
Check that the shift lever is in P. Press the
engine switch shortly and firmly while
turning the steering wheel left and right.