Lexus RX350 Manual page 129

A buzzer will sound and then the operation
will start. When the operation is com-
pleted, the buzzer will sound twice again.
To stop the operation partway, press either
side of the switch for the operating seat.
Any rear seat operation switch for the
operating seat, regardless of location, can
be used to stop the operation. (A buzzer
may sound depending on the position that
the rear seatback is stopped.)
Using the seatback angle adjust-

ment switch
Using the switch in the luggage

compartment
2
Check that the plate of the seat belt
is on the front side of the seatback.
3-3. Adjusting the seats
Folding the rear center seatback
■
only
Pull the lock release lever on the back
side of the seatback and fold the center
seatback.
To return the rear center seatback to its
original position, lift it until it locks in posi-
tion.
■ Engine switch mode conditions under
which the rear seatbacks can be folded
down or raised (power seat)
The rear seatbacks can be folded down or
raised when the engine switch is in either of
the following modes:
When the engine switch is turned off or in
●
ACCESSORY mode
● When the engine switch is in IGNITION
ON mode and any of the following con-
ditions are met:
• The parking brake is engaged.
• The brake pedal is depressed.
• The shift lever is in P.
The rear seatbacks can be folded down
■
when (power seat)
When all of the following conditions are
met, a rear seat operation switch can be
used to fold down the rear seatback:
When using the rear seat operation
●
switch (rear seat): The rear seatback is in
a position within the range
the illustration with the rear door nearest
to the seat to be operated open (
where the rear seatback is at its most
upright position)
● When using the rear seat operation
129
3
shown in
A
is
C