Using automatic mode
Center Display
1
Select "Rear AUTO" on the sub
function menu. (P.307)
2
To stop the operation, select "Rear
off" on the sub function menu.
(P.307)
If the fan speed setting or air flow
modes are operated, the automatic
mode indicator goes off. However,
automatic mode for functions other
than that operated is maintained.
Rear air conditioning system control
panel
1
Press "AUTO" on the rear air con-
ditioning system control panel.
2
To stop the operation, select "OFF"
on the rear air conditioning system
control panel.
If the fan speed setting or air flow
modes are operated, the automatic
mode indicator goes off. However,
automatic mode for functions other
than that operated is maintained.
■
Using automatic mode
Fan speed is adjusted automatically accord-
ing to the temperature setting and the
ambient conditions.
Therefore, the fan may stop for a while until
warm or cool air is ready to flow immedi-
ately after "Rear AUTO" is selected or
"AUTO" is touched.
Cool air may blow around the upper body
even when the heater is on due to sunlight.
5-3. Using the air conditioning system and defogger
Adjusting the temperature set-
ting of the rear seats
The temperature setting of the rear
seats can be adjusted using the follow-
ing methods:
When the "3-ZONE" indicator is
off: Adjust the driver's seat tempera-
ture.
Adjust the temperature setting of each
rear seat using the Center Display or rear
air conditioning system control panel.
Adjust the temperature setting of
rear seats using the Center Display
(rear air conditioning control
screen) or rear air conditioning sys-
tem control panel.
Air outlets
Location of air outlets
■
The air outlets and air volume changes
according to the selected air flow
mode.
Adjusting the position of and open-
■
ing and closing the air outlets
Adjusting the position of and opening
and closing the air outlets
309
5